A.by injection pumps
B.at a time decided by the injection pump timing
C.by a signal opening the magnetic valves
D.at a time decided by the cam directly
您可能感興趣的試卷
你可能感興趣的試題
A.stored in a common fuel line
B.pumped by the injection pump
C.at low pressure
D.already atomized
A.fluctuates with the engine speed to some extent, independent of the engine speed
B.keeps constant at all engine speed, dependent on the engine speed to some extent
C.keeps constant at all engine speed, independent of the engine speed
D.is decided by the engine speed, constant at all engine speed
A.for FP, once fitted, the position of the blades can also be changed in operation
B.for CP, once fitted, the position of the blades can also be changed in operation
C.the CP type has a relatively smaller hub compared with the FP propellers
D.the FP type has a relatively larger hub compared with the CP propellers
A.shaft
B.boss
C.wheel
D.lever
A.higher
B.lower
C.very higher
D.very lower
最新試題
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()
Under MARPOL Code the ship to which it applies has to carry ()
Using a file without a handle may result in ()
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.
The additional mark ()in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
The condensers located in various stages of a flash evaporator are cooled by()
The shipboard oil pollution emergency plan will be invalid after ()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
Flame failure in an automatically fired auxiliary boiler can from a/an ()