A.decrease only
B.increase only
C.decrease slightly then returned to original speed
D.increase slightly then returned to original speed
您可能感興趣的試卷
你可能感興趣的試題
A.speed, torque, and horsepower production
B.firing order, valve timing, and valve lift
C.fuel consumption, efficiency, and cylinder pressure
D.scavenge pressure, compression ratio, and exhaust pressure
A.maintain low pH in the cooling water
B.reduce the cooling water temperature
C.increase cooling water hardness
D.form a protective film on metal surfaces
A.prolong the ignition delay period
B.ensure the beginning of fuel injection
C.thoroughly utilize the air charge
D.allow controlled fuel combustion
A.deliver proper fuel quantity to the injection nozzle
B.provide rapid fuel injection cutoff
C.control fuel quantity entering the pump body
D.control fuel pressure delivered to the combustion chamber
A.of a material harder than the cylinder liner
B.properly lubricated
C.prevented from compressing
D.prevented from rotating during engine operation
最新試題
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to ()
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.
The main purpose of port State control is not to()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
The condensers located in various stages of a flash evaporator are cooled by()
()are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
Using a file without a handle may result in ()
If two A.C.generators are to be operated in parallel, the load is distributed evenly by()