A.breaking the fire chemical chain reaction
B.smothering
C.cooling
D.isolating the heat from the fuel
您可能感興趣的試卷
你可能感興趣的試題
A.quantity of fuel to be received
B.flash point of the fuel as it is received
C.fuel temperature as it is received
D.viscosity of the fuel being received
A.close the static leg filling valve
B.close the overflow tank falling valve
C.reduce the fuel oil pumping rate
D.stop the fuel oil pumping operation
A.The pressure-vacuum relief valve should be reset
B.The tanks should be made seaworthy to prevent contamination
C.The tanks should be sounded to make sure the levels are not rising
D.The tanks should be marked with a bull stamp on the manifold filling valve
A.hose joints are made up
B.tanks are being topped off
C.system is being lined up
D.pumping operation is first started
A.Reduce the pumping rate by closing the deck filling valve
B.Close all overflow valves
C.Place 5 gallon containers under all flange connections in the fuel line
D.Reduce the pumping rate and sound tanks frequently as the level rises
最新試題
To proceed to the assistance of a ship in distress is()
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.
The ISPS Code consists of a mandatory section-Part A, which shows()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
The treatment of the fuel oils involves storage, heating, filtering and()
The main purpose of port State control is not to()
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?()
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a()