A.change in the impeller diameter
B.square of the impeller radius
C.cube of the impeller diameter
D.impeller efficiency for large changes in its size
您可能感興趣的試卷
你可能感興趣的試題
A.As pressure decreases, volume increases
B.As volume increases, pressure increases
C.As volume decreases, pressure decreases
D.As pressure increases, volume increases
A.readjust the relief valve
B.throttle the suction line
C.throttle the discharge valve
D.open the priming line
A.transmitter at the steering station and a receiver at the steering engine
B.reversible motor at the steering station geared to the steering pumps
C.small induction motor on the bridge which controls the redder through pulleys
D.variable displacement hydraulic pump driven by a reversible DC motor
A.Distiller air ejector cooling medium
B.Saltwater heater discharge
C.First-stage internal feed box
D.Second-stage internal feed box
A.condenser
B.vapor generator
C.accumulator
D.evaporator
最新試題
A salinity indicator is used to determine the （）.
Low compressor head pressure in a refrigeration system can be caused by（）.
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be （）.
The amount of fluid friction or internal friction inherent in a mineral lubricating oil is reflected as a measure of its （）.
On tank vessels equipped with power operated cargo tank valves, the type of power operator most commonly used is （）.
The rate of heat transfer between the hot and cold fluids passing through a shell-and-tube type heat exchanger will （）.
The temperature differential occurring between the inlet temperature of the fluid to be cooled and the outlet temperature of the cooling medium in a shell-and-tube heat exchanger is greatest in which of the flow designs listed?（）
If the head pressure of a reciprocating refrigeration compressor is excessive, （）.
An excessive charge of refrigerant in an air-cooled refrigeration system can cause （）.
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will （）.