A.The liquid receiver functions to collect and remove non-condensable gases
B.A thermostatic expansion valve is used to control refrigerated space temperature
C.Refrigerant temperature in an evaporator is directly related to refrigerant pressure
D.Dehydrators must be used continuously in a refrigeration system
您可能感興趣的試卷
你可能感興趣的試題
A.directly increase the pressure of the liquid being pumped
B.directly increase the velocity of the liquid being pumped
C.convert the potential energy of the liquid to kinetic energy
D.separate air from the liquid being pumped
A.overheated compressor bearings
B.excess lube oil viscosity
C.carbon deposits on the compressor piston rings
D.wax crystals forming in the lubricant
A.electric motor
B.volute
C.impeller
D.diffusion nozzle
A.expansion valve to overfeed
B.compressor to knock
C.water regulating valve to fail
D.crankcase drains to plug
A.poor distillate quality
B.reduced evaporator capacity
C.low brine concentration
D.improper vacuum regulation
最新試題
A grease gun is generally used to lubricate a （）.
The control mode in which the final control element is moved from one of two flexed positions to the other is known as （）.
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by （）.
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be （）.
Thermostatic expansion valves can be adjusted for （）.
A salinity indicator is used to determine the （）.
Which of the following problems could cause the high pressure cutout switch to shut down the compressor in a refrigeration system?（）
An increasing head pressure in a refrigeration system, without any corresponding change in the cooling water inlet temperature, would probably be caused by （）.
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will （）.
One cause of high head pressure occurring in a refrigeration system can be （）.