A.too much refrigerant in the system
B.oil entrained in the refrigerant
C.less than a full charge of refrigerant in the system
D.ice crystals forming in the refrigerant
您可能感興趣的試卷
你可能感興趣的試題
A.with both pumps on line at the same time
B.with one pump on standby
C.with the follow-up gear disconnected
D.only when the rudder is moved amidships
A.high temperature distillate can be re- circulated to induce additional flashing
B.scale formation is not a severe problem
C.cold shocking is more effective in removing scale
D.water purity is greatly increased at high capacity
A.high pressure liquid line
B.low pressure liquid line
C.high pressure vapor line
D.low pressure vapor line
A.more efficiently uses available engine power
B.operates at a lower efficiency at a fixed speed
C.produces the same torque at lower engine power
D.develops its rated power at a lower speed
A.more efficiently uses available engine power
B.operates at a lower efficiency at a fixed speed
C.produces the same torque at lower engine power
D.develops its rated power at a lower speed
最新試題
Who is responsible for ensuring that someone is assigned to close the watertight doors in an emergency?()
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump ().
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by ().
The major source of chemical contaminants in hydraulic fluid is ().
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by ().
An excessive charge of refrigerant in an air-cooled refrigeration system can cause ().
A salinity indicator is used to determine the ().
The rate of heat transfer between the hot and cold fluids passing through a shell-and-tube type heat exchanger will ().
A salinity indicator is used to determine the ().
If the suction pressure at the refrigeration compressor is below normal, the cause can be().