A.psychrometer
B.salinometer
C.anemometer
D.sphygmomanometer
您可能感興趣的試卷
你可能感興趣的試題
A.A large change of viscosity occurs with a minor change in temperature
B.No change in viscosity occurs with any change in temperature
C.Very little change in viscosity occurs with a significant change in temperature
D.The viscosity of the oil increases with an increase in temperature
A.pump would be very noisy
B.pump would vibrate excessively
C.pump would develop insufficient flow
D.stuffing box would leak excessively
A.gravity and feed oil cups
B.grease cups
C.hand during installation
D.leakage through the stuffing box
A.a needle gun
B.soap and water
C.a wire brush
D.a chipping hammer
A.Hydrochloric acid
B.Chlorine
C.Sulfuric acid
D.Zinc chromate
最新試題
Thermostatic expansion valves can be adjusted for （）.
An increasing head pressure in a refrigeration system, without any corresponding change in the cooling water inlet temperature, would probably be caused by （）.
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will （）.
The general purpose of a heat exchanger is to （）.
The control mode in which the final control element is moved from one of two flexed positions to the other is known as （）.
The amount of fluid friction or internal friction inherent in a mineral lubricating oil is reflected as a measure of its （）.
The major source of chemical contaminants in hydraulic fluid is （）.
An internal bypass is provided on some hydraulic system suction strainers to help reduce the possibility of （）.
An excessive charge of refrigerant in an air-cooled refrigeration system can cause （）.
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by （）.