輪機英語船舶動力裝置章節練習(2018.01.30)

來源：考試資料網

1 In a diesel engine, excessive cylinder liner wear will cause （）
(1) increased blow-by
(2) wear between the piston ring and groove

點擊查看答案

2 The removal of （） from lubricating oil will reduce engine wear and possible breakdowns.

點擊查看答案

3 In a purifier, the interface between the liquid seal and the oil should be positioned as close as possible to （）.

點擊查看答案

4 When to remove scale from the cooling spaces, acid solution （） in the system can be tested from time to time by putting some on to a piece of lime.

點擊查看答案

5 The external circumference of a pair of main bearing shells is slightly larger than that of the bore of the housing which receives themThe difference is termed （）.

點擊查看答案

6 Generally the function of lubrication is to form of a film of lubricant between any two surfaces that have relative （）, so that surfaces dont get touch with each other.

點擊查看答案

7 （） is used for cylinder and cylinder head, the salt water is used for cooling the lubricating oil, the fresh water in the coolers and the charging air in the air cooler.

點擊查看答案

8 The crank throws are displaced from （） to obtained the same number of degrees between the different crank throws.

點擊查看答案

9 （） fuel oils （） lubricating oils require treatment before passing to the engine.

點擊查看答案

10 In four strokes engine, the cycle of events is completed in four strokes of （）.

點擊查看答案