單項選擇題Network equipment supporting the use of flow control mechanisms has been recently installed. What is the purpose of flow control in a data network?()

A. It ensures that data is retransmitted if an acknowledgment is not received.
B. It reassembles segments in the correct order on the destination device.
C. It provides a mechanism for the receiver to control the transmission speed.
D. It regulates the size of each datagram segment.
E. All of the above are functions of flow control


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題The command "ip route 192.168.24.64 255.255.255.192 192.168.8.2 100" was configured on a router named TK1. No routing protocols or other static routes are configured on the Corporate router yet.Based on this information, which statement is true about this command?()

A. This command sets a gateway of last resort for the TK1 router.
B. The number 100 indicates the number of hops to the destination network.
C. The interface with IP address 192.168.8.2 is on the TK1 router.
D. The command creates a static route for all IP traffic with the source address 192.168.24.64.
E. Packets destined for host 192.168.24.124 will be sent to 192.168.8.2.
F. None of the above

2.單項選擇題A PC on a network segment sends data to another PC on a different segment.Which of the following correctly describe the correct order of how this data will be encapsulated?()

A. Data, Frame, Packet, Segment, Bit
B. Data, Frame, Segment, Packet, Bit
C. Data, Packet, Frame, Segment, Bit
D. Data, Packet, Segment, Frame, Bit
E. Data, Segment, Frame, Packet, Bit
F. Data, Segment, Packet, Frame, Bit

3.單項選擇題What term is used to describe the process where one frame is placed into a different type of frame?()

A. Framing
B. De-encapsulation
C. Encapsulation
D. De-framing
E. None of the above

4.多項選擇題Regarding PAR (Positive Acknowledgement and Re-transmission), which of the answer choices below are correct?()

A. The source device will only retransmit lost packets on the request of the destination device.
B. The source device starts a timer when it sends a segment and retransmits if an acknowledgment is not received before the timer expires.
C. The destination device acknowledges receipt of a segment by sending a packet with a new sequence number and the ACK bit sent.
D. The destination device acknowledges receipt of a segment by sending a packet that indicates the next sequence number it expects.
E. If the destination device does not receive a segment, all segments are retransmitted.
F. The source device keeps a record of all segments sent and expects and acknowledgment of each.

最新試題

Which statement describes the rule of split horizon?()

題型:單項選擇題

Which of the following contribute to congestion on an Ethernet network?()

題型:多項選擇題

What is the subnetwork address for a host with IP address 201.100.5.68/28?()

題型:單項選擇題

A Class C network address has been subnetted with a /27 mask.Which of the following addresses is a broadcast address for one of the resulting subnets?()

題型:單項選擇題

You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?()

題型:多項選擇題

The network 172.12.0.0 needs to be divided into subnets where each subnet has the capacity of 458 IP addresses.What would be the correct subnet mask to accomplish this division keeping the number of subnets at the maximum? ()

題型:單項選擇題

A network host is configured as follows: Host IP address: 192.168.16.183 Subnet mask: 255.255.255.224 Default gateway: 192.168.16.190 Which of the following statements describe the network to which this host is attached?()

題型:多項選擇題

TestKing.com has allocated the IP add 199.144.27.0 is its network, to provide flexibility for the LAN design, a subnet mask of 255.255.255.240 has been chosen. Which of the following address can be assigned to LAN on the resulting subnets.()

題型:多項選擇題

Which command is used to display the placement and direction of an IP access control list on a router?()

題型:單項選擇題

New switches have been purchased for a network upgrade. The objective for the network design emphasizes efficient, error-free transport instead of fast transport.Which switching mode should be configured on the new switches to provide error-free transport to the network? ()

題型:單項選擇題