單項選擇題

The following was issues on router TestKingA:
TestKingA #show ip ospf neighbor
Neigbor ID PRI State Dead Time Address Interface
192.168.1.2 1 Full/- 00:00:37 192.168.1.2 Serial1
Which type of OSPF network will provide the output shown in the graphic?（）

A. FDDI
B. nonbroadcast multiaccess
C. broadcast multi-access
D. point-to-point


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題TestKing.com has a large corporate network that uses multiple routing protocols.Hosts in a portion of the network that uses EIGRP have become unreachable.Which router command will allow you, the network technician, to view the status of these routes?（）

A. TestKing# show eigrp entries
B. TestKing# show protocols
C. TestKing# debug eigrp routes
D. TestKing# show ip route eigrp
E. TestKing# show route eigrp

2.多項選擇題Which IOS commands can a network technician use to verify all RIP, IGRP,EIGRP, and OSPF routing protocol configurations?（）

A. debug ip routing
B. show running-config
C. show ip route protocols
D. show ip protocols
E. show protocols al

3.單項選擇題Which command will display all the EIGRP feasible successor routes known to a router?（）

A. Router# show ip eigrp routes *
B. Router# show ip eigrp summary
C. Router# show ip eigrp topology
D. Router# show ip eigrp adjacencies
E. Router# show ip eigrp neighbors detail

4.單項選擇題

You try to add a new router into the established Testking OSPF network. The networks attached to the new router do not appear in the routing tables of the other OSPF routers.The new router was configured for OSPF in the following way:
Router(config)# router ospf 99
Router(config-if)# network 10.0.0.0 255.0.0.0 area 0
Based on this information, what is the most likely problem?（）

A. The process id is configured improperly.
B. The OSPF area is configured improperly.
C. The network wildcard mask is configured improperly.
D. The network number is configured improperly.
E. The AS is configured improperly.
F. The network subnet mask is configured improperly.
G. All of the above are likely problems.

5.單項選擇題The following routes exist in the Testking router（）

A. R 12.18.8.0/24 [120/1] via 12.18.2., 00:00:10, Serial0
B. R 12.18.11.0/24 [120/7] via 12.18.9.1, 00:00:03, Serial1
C. C 12.18.1.0/24 is directly connected, Ethernet0
D. R 12.18.5.0/24 [120/15] via 12.18.2.2, 00:00:10, Serial0