單項選擇題If the bandwidth of an OSPF interface is configured with the "bandwidth 64"command, what would be the calculated cost of the link?()

A. 1
B. 64
C. 1562
D. 64000
E. 1500


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題What are the characteristic of link state routing protocols?()

A. The exchange of advertisement is triggered by a change in the network.
B. All routers exchange routing tables with each other iIn a multipoint network.
C. Packets are routed based upon the shortest path to the destination.
D. Paths are chosen depending on the cost efficiency factor.
E. Every router in an OSPF area is capable of representing the entire network topology.
F. Only the designated router in an OSPF area can represent the entire network topology.

2.多項選擇題The statements below compare and contrast link state and distance vector routing protocols. Which of these are true?()

A. Distance vector protocols send the entire routing table to directly connected neighbors.
B. Distance vector protocols are responsible for sending updates to all networks listed in the routing table.
C. Link state protocols are responsible for sending the entire routing table to the whole network.
D. Link state protocols send updates regarding their own links status to all other routers on the network.

3.單項選擇題On the assumption that every OSPF router in a particular area is configured with there is no loopback interface set?()

A. The IP address of the first Fast Ethernet interface.
B. The IP address of the console management interface.
C. The highest IP address among its active interfaces.
D. The lowest IP address among its active interfaces.
E. There will be no router ID until a loopback interface is configured.

4.單項選擇題Under which circumstance, ie network type, would an OSPF router establish a neighbor adjacency, even though the DR/BDR election process was not performed?()

A. Point-to-point
B. Broadcast multicast
C. Nonbroadcast multicast
D. Backbone area 0
E. Virtual Link

最新試題

Which of the following options lists the steps in PPP session establishment in the correct order?()

題型:單項選擇題

The network 172.12.0.0 needs to be divided into subnets where each subnet has the capacity of 458 IP addresses.What would be the correct subnet mask to accomplish this division keeping the number of subnets at the maximum? ()

題型:單項選擇題

Which of the following contribute to congestion on an Ethernet network?()

題型:多項選擇題

Which of the following statements regarding routed and routing protocols are true?()

題型:多項選擇題

Which command is used to display the placement and direction of an IP access control list on a router?()

題型:單項選擇題

What is the subnetwork address for a host with IP address 201.100.5.68/28?()

題型:單項選擇題

What should the configuration register value be after successfully completing the password recover procedure and returning the router to normal operation? ()

題型:單項選擇題

Which of the following host addresses are member of networks that can be routed across the public Internet? ()

題型:多項選擇題

New switches have been purchased for a network upgrade. The objective for the network design emphasizes efficient, error-free transport instead of fast transport.Which switching mode should be configured on the new switches to provide error-free transport to the network? ()

題型:單項選擇題

What is a global command?()

題型:單項選擇題