A.It is used for PIM control traffic
B.It is optionally configured for a high bandwidth multicast source to reduce multicast traffic replication to uninterested PE routers
C.Within the VPF configuration in the PE router， multiple Default MDT groups are configured so each VPF can support multiple multicast sources
D.There is a reduced multicast state in the MPLS core P routers
E.When multicast traffic exceeds a certain configured threshold， traffic from the Data MDT is switched to the Default MDT to conserve bandwidth
您可能感興趣的試卷
你可能感興趣的試題
A.Logging detect fail-login
B.Login on-failure log
C.Login detect login-failure log
D.Logging login on-failure
E.none of the above
A.GFC-4 bits of generic flow control
B.Forward-explicit congestion notification（FECN）
C.VCI-16 bits of virtual channel identifier
D.CLP-1 bit of congestion loss
E.HEC-8 bit of header error control
F.ATM Discard Eligibility（DE）bit
A.lowest cost
B.highest bandwidth
C.lowest hop-count
D.path attributes
E.lowest delay
A.It prevents message looping，Session Advertisement（SA）messages must be RPF checked
B.RPF check should be done against the route to the Rendez-vous Point of the corresponding PIM-SM domain，which originated the SA
C.RPF checking Session Advertisement（SA）messages will cause message looping
D.RPF check should be done against the route to the source S of the corresponding PIM-SM domain
A.LDP and RSVP
B.RSVP and CEF
C.CEF and the FIB table
D.UDP and IP
E.A and B
最新試題
Which two statements about 10 Gigabit Ethernet （10GE） are true？（）
All secure domain routers （SDRs） have shared attribute and resources. Which three resources are sharedall SDRs？ （）
There are two cabling schemes to choose from when implementing a Cisco CRS-1 multishelf system：single-module cabling and multimodule cabling. What is the maximum capacity of the LCCs that aresupported in multimodule cabling？（）
Which of the following is used to periodically multicast by DIS on a LAN to ensure IS-IS link state databaseaccuracy？（）
In optical transmission systems， chirped lasers are used for the purpose of：（）.
Which option is not a valid method to assign the lowest-order 64-bit field of an IPv6 unicast address？（）
Which two requirements to deploy 6PE and 6VPE solutions are mandatory？（）
Which information is carried in the OSPFv3 intra-area Prefix LSA？（）
When an MPLS Layer 2 VPN runs in the hub-and-spoke model， where is QoS implemented？（）
What are three common reasons for ATM CRC errors？（）