A. Join interface is a Layer 3 entity， and with the Cisco NX-OS release 6.0， it can only be defined as a physical interface， physical subinterface， Layer 3 port channel， or Layer 3 port channel subinterface.
B. A single join interface can be defined and associated with a given OTV overlay.
C. Multiple overlays can also share the same join interface.
D. Join interface can be a loopback interface.
E. The join interface is a Layer 3 entity that can be defined as a physical interface but not as a logical one.
您可能感興趣的試卷
你可能感興趣的試題
The network administrator is seeing N7K-1 having issues with VLAN 11， and interface VLAN 11 is resetting， causing frequent HSRP state changes. Which two actions would reduce HSRP state changes？ （）
A..On N7K-1，configure the HSRP extended hold timer to 180， extending the HSRP hello message hold time.
B..On N7K-2，configure the HSRP extended hold timer to 180， extending the HSRP hello message hold time.
C..On N7K-1，configure the pre-empt delay minimum to 180 in order to delay N7K-1 from taking over as the HSRP active router.
D..On N7K-2，configure the pre-empt delay minimum to 180 in order to delay N7K-2 from taking over as the HSRP active router.
E..On N7K-2，increase the HSRP priority to 150.
F. On N7K-2，decrease the HSRP priority to 50.
A. When an OTV edge device receives a Layer 2 frame destined for a remote data center site， the frame is logically forwarded to the overlay interface.
B. The OTV edge device performs the dynamic OTV encapsulation on the Layer 2 packet and sends it to the join interface toward the routed domain.
C. When the OTV edge device receives a Layer 2 frame destined for a remote data center site， the frame is logically forwarded to the join interface.
D. The OTV edge device performs the dynamic OTV encapsulation on the Layer 2 packet and sends it to the overlay interface toward the routed domain.
A. port-profile
B. command
C. access-list
D. feature-group
E. OID
A. Enable feature vPC
B. Define domains
C. Establish peer keepalive connectivity
D. Create a peer link
E. Configure the peer link as a trunk port
F. Create port channels and vPCs
G. Define port channel load-balancing method
H. Make sure configurations are consistent
A. UCS Manager XML API and UCS CLI
B. SNMP， SMASH CLP， and CIM-XML
C. UCS Manager， DCOS， and Local-mgmt
D. SoL and NX-OS
E. debug-plugin and UCS Manager GUI
最新試題
Server load balancing （SLB） is the process of deciding to which server a load-balancing device should send a client request for service. Which predictors are supported on ACE in order to select the best server to fulfill a client request？ （）
What is the purpose of this command in a Cisco Application Control Engine？（） switch/Admin# show np 1 me-stats "-F0 v"
What is required for Cisco UCS C-Series rack server integration with Cisco UCS Manager？（）
Your company wants Server 1/eth0 （vNIC 1） configured so that it always uses Fabric Interconnect A Port Channel 1 （Po1） when it communicates with anything outside of the Cisco UCS domain. However， if vNIC 1 fails over to Fabric Interconnect B using fabric failover， then vNIC 1 can any uplink port on Fabric Interconnect B. Which statements are true？ （）
Which of the following are supported in Cisco Global Site Selector？ （）
In the event of a GSS failure in a GSS cluster， which is true？（）
Which is true when describing a connection replication in Cisco ACE？（）
When will an "all configuration" backup be imported into the Cisco UCS Manager？（）
What is the appliance port used to connect to in a Cisco Unified Computing System？（）
An administrator creates a vNIC and assigns it to Fabric A with the fabric failover feature enabled. Which statement is true？（）