您可能感興趣的試卷
你可能感興趣的試題
Refer to the exhibit. From the MAC addresses shown in the command output, to which two ports is the multicast stream 225.230.57.199 being forwarded on this switch? ()
A.Fa6/28
B.Fa7/20
C.Gi3/7
D.Fa4/2
E.Fa4/14
F.Fa4/38
A.OSPF external LSAs are automatically flooded into all OSPF areas, unlike type 7 LSAs, which require that redistribution be configured.
B.External LSAs (type 5) are automatically changed to type 1 LSAs at ASBRs.
C.Type 5 LSAs are route summaries describing routes to networks outside the OSPF Autonomous System.
D.External network LSAs (type 5) redistributed from other routing protocols into OSPF are not permitted to flood into a stub area.
A.Each interface has a different OSPF cost.
B.Each interface is configured with secondary addresses as well as primary addresses.
C.Each interface has a different MTU size.
D.Each interface is configured with theip unnumbered loopback 0 command.
Refer to the exhibit. Router E learned about the PIM RP (designated as 7.7.7.7) from four different sources. Routers A and D advertised the 7.0.0.0 network via EIGRP. Routers B and C advertised the 7.0.0.0 network via OSPF. Considering that all four Ethernet interfaces on router E could potentially lead back to the PIM-RP, when router E receives the first multicast packet down the shared tree, which incoming interface will be used to successfully pass the RPF check?()
A.E0
B.E1
C.E2
D.E3
E.None of these interfaces will be used to successfully pass the RPF check
F.All of these interfaces would successfully pass the RPF check
最新試題
What field in IP packet is used for classification by QOS?
如何實現擁塞避免?
什么是NAT?
一堆交換機一個server、一個transpare,問配置prune在哪里配置?
Refer to the exhibit.How many broadcast domains exist in theexhibited topology?()
How should arouter that is being used in a Frame Relay network be configured to avoid split horizon issues from preventing routing updates?()
什么問題導致SERVER VTP密碼跟替他交換機VTP密碼不匹配?
問一個怎么樣的屬性,能讓路由不通告給任何的peer?
SPT初始狀態之后的一個狀態是什么?
What is the three main step of using the QoS feature with MQC command line interface?