A.0.0.0.240
B.255.255.255.252
C.255.255.255.0
D.255.255.255.224
E.255.255.255.240
您可能感興趣的試卷
你可能感興趣的試題
A.IP address:192.168.20.14 Subnet Mask:255.255.255.248 Default Gateway:192.168.20.9
B.IP address:192.168.20.254 Subnet Mask:255.255.255.0 Default Gateway:192.168.20.1
C.IP address:192.168.20.30 Subnet Mask:255.255.255.248 Default Gateway:192.168.20.25
D.IP address:192.168.20.30 Subnet Mask:255.255.255.240 Default Gateway:192.168.20.17
E.IP address:192.168.20.30 Subnet Mask:255.255.255.240 Default Gateway:192.168.20.25
A.telnet access does not require a password
B.nat
C.no broadcast
D.chanage of destination address in the ipv6 header
E.chanage of source address in the ipv6 header
F.autoconfiguration
A.telnet access does not require a password
B.nat
C.no broadcast
D.chanage of destination address in the ipv6 header
E.chanage of source address in the ipv6 header
F.autoconfiguration
A.Global addresses start with 2000::/3.
B.Link-local addresses start with FE00:/12.
C.Link-local addresses start with FF00::/10.
D.There is only one loopback address and it is ::1.
E.If a global address is assigned to an interface, then that is the only allowable address for the interface.
Refer to the diagram. All hosts have connectivity with one another. Which statements describe the addressing scheme that is in use in the network? ()
A.The subnet mask in use is 255.255.255.192.
B.The subnet mask in use is 255.255.255.128.
C.The IP address 172.16.1.25 can be assigned to hosts in VLAN1
D.The IP address 172.16.1.205 can be assigned to hosts in VLAN1
E.The LAN interface of the router is configured with one IP address.
F.The LAN interface of the router is configured with multiple IP addresses.
最新試題
In a GLBP network, who is responsible for the arp request?()
A network administrator creates a layer 3 EtherChannel, bundling four interfaces into channel group 1. On what interface is the IP address configured?()
What is the default Syslog facility level?()
What are the three things that the Netflow uses to consider the traffic to be in a same flow ?()
What command instructs the device to timestamp Syslog debug messages in milliseconds?()
What are three factors a network administrator must consider before implementing Netflow in the network?()
What SNMP message alerts the manager to a condition on the network?()
What command visualizes the general NetFlow data on the command line?()
What are three reasons to collect Netflow data on a company network?()
A network administrator enters the following command on a router: logging trap 3. What are three message types that will be sent to the Syslog server? ()