A.應用
B.表示
C.會話
D.傳輸
E.網絡
F.數據鏈路
您可能感興趣的試卷
你可能感興趣的試題
A.RIP is an example of distance vector routing protocols
B.Updates are periodic and include the entire routing table
C.Routing updates are sent only after topology changes
D.The protocol can be useful in hub-and-spoke and hierarchical networks
E.Convergence is usually faster than with link state protocols
F.Each router has its own view of the topology
A.to make VTP easier to implement
B.to isolate broadcast traffic
C.to increase the size of the collision domain
D.to allow more devices to connect to the network
E.to logically group hosts according to function
F.to increase network security
請參見圖示,主機A ping接口S0/0的router3,什么是該ping的TTL值?()
A. 253
B. 252
C. 255
D. 254
A.spanning-tree backbonefast
B.spanning-tree uplinkfast
C.spanning-tree portfast
D.spanning-tree cost512
Refer to the exhibit.The network shown in the diagram is experiencing connectivity problems. Which of the following will correct the problems?()
A.Configure the gateway on Host A as 10.1.1.1.
B.Configure the gateway on Host B as 10.1.2.254.
C.Configure the IP address of Host A as 10.1.2.2.
D.Configure the IP address of Host B as 10.1.2.2.
E.Configure the masks on both hosts to be 255.255.255.224.
F.Configure the masks on both hosts to be 255.255.255.240.
最新試題
在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()
請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()
請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€(gè)邏輯地址范圍?()
路由器使用哪一項信息來確定源主機和目的主機之間的路徑?()
請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置?()
請參見圖示。哪種邏輯拓?fù)涫菍?duì)圖示網絡的準確描述?()
PC 無法連接到任何遠程網站,無法ping 通其默認網關,也無法ping 通本地網段中工作正常的打印機。以下哪項操作可以確認此PC 上的TCP/IP 協議棧是否工作正常?()
OSI 模型的哪兩項功能在第2層實現?()
傳輸層如何讓主機能同時針對不同應用程序維護多個通信流?()