精品一久久香蕉国产线看播放,肏人妻人妇视频小说

多項選擇題Why do large OSPF networks use a hierarchical design?（）

A.to confine network instability to single areas of the network.
B.to reduce the complexity of router configuration
C.to speed up convergence
D.to lower costs by replacing routers with distribution layer switches
E.to decrease latency by increasing bandwidth
F.to reduce routing overhead

點擊查看答案

您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題 A TCP/IP Transfer is diagrammed in the exhibit.A window size of three has been negotiated for this transfer. Which message will be returned from the receiver to the sender as part of this TCP/IP transfer?（）

A.Send ACK 1-3
B.Send ACK 3
C.Send ACK 4
D.Send ACK 4-6
E.Send ACK 6
F.Send ACK 7

點擊查看答案

2.多項選擇題 Host1正在試圖和Host2聯(lián)系。RouterC的e0接口是down的，以下選項正確的是？（）

A.RouterC會使用ICMP通知Host1&ldquo；Host2無法到達&rdquo；
B.RouterC會使用ICMP通知Host1&ldquo；Host1無法到達&rdquo；
C.RouterC會使用ICMP通知Host1，RouterA和RouterB&ldquo；Host2無法到達&rdquo；
D.RouterC會發(fā)送一個&ldquo；DestinationUnreachable&rdquo；的消息類型
E.RouterC會發(fā)送一個&ldquo；RouterSelection&rdquo；的消息類型
F.RouterC會發(fā)送一個&ldquo；SourceQuench&rdquo；的消息類型

點擊查看答案

3.單項選擇題How many subnets can be gained by subnetting 172.17.32.0/23 into a /27 mask, and how many usable host addresses will there be per subnet?（）

A.8 subnets, 31 hosts
B.8 subnets, 32 hosts
C.16 subnets, 30 hosts
D.16 subnets, 32 hosts
E.A Class B address can't be subnetted into the fourth octet.

點擊查看答案

4.單項選擇題 As a network administrator，you have been instructed to prevent all traffic or iginating on the LAN from entering the R2 router.Which the following command would implement the access list on the interface of theR2 router？（）

A.access-list 101 in
B.access-list 101 out
C.ipaccess-group 101 in
D.ipaccess-group 101 out

點擊查看答案

5.單項選擇題 S0/0 on R1 is configured as a multipoint interface to communicate with R2 and R3 in the hub-and-spoke Frame Relay topology shown in the exhibit. Originally, static routes were configured between these routers to successfully route traffic between the attached networks. What will need to be done in order to use RIPv2 in place of the static routes?（）

A.Configure the no ip subnet-zero command on R1, R2, and R3.
B.Dynamic routing protocols such as RIPv2 cannot be used across Frame Relay networks.
C.Configure the S0/0 interface on R1 as two subinterfaces and configure point-to-point links to R2 and R3.
D.Change the 172.16.2.0/25 and 172.16.2.128/25 subnetworks so that at least two bits are borrowed from the last octet.
E.Change the network address configuration to eliminate the discontiguous 172.16.2.0/25 and 172.16.2.128/25 subnetwork.

點擊查看答案