A.arpa
B.ansi
C.ietf
D.nonstandard
E.Q.933a
F.Cisco
您可能感興趣的試卷
你可能感興趣的試題
A.display fr map-info(顯示映射表)
B.display fr pvc-info(PVC統計信息)
C.display fr lmi-info
D.display interface
Refer to the exhibit. What does the (*) represent in the output?()
A.Packet is destined for a local interface to the router.
B.Packet was translated, but no response was received from the distant device.
C.Packet was not translated, because no additional ports are available.
D.Packet was translated and fast switched to the destination.
A.This is a 10 Mb/s switch port
B.This is a 100 Mb/s switch port
C.This is an Ethernet port operating at half duplex
D.This is an Ethernet port operating at full duplex
E. This is a port on a network interface card in a PC
Refer to the exhibit. The user at Workstation B reports that Server A cannot be reacheD.What ispreventing Workstation B from reaching Server A?()
A.The IP address for Server A is a broadcast address.
B.The IP address for Workstation B is a subnet address.
C.The gateway for Workstation B is not on the same subnet.
D.The gateway for Server A is not on the same subnet.
A.DDN線路使用簡便,覆蓋面廣
B.DDN專線是點到點的鏈路,它給予用戶訪問整個鏈路帶寬的可能性
C.DDN相對于分組交換網絡來說,線路費用較高
D.DDN專線被廣泛用于企業網互連,專線internet接入
最新試題
請參見圖示。哪種邏輯拓?fù)涫菍?duì)圖示網絡的準確描述?()
路由器使用哪一項信息來確定源主機和目的主機之間的路徑?()
請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置?()
在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()
請參見圖示。主機A 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,路由器Y 的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為172.16.1.5而目的IP 地址為172.16.7.24的數據包。捕獲該幀時,它的源MAC 地址是什么?()
請參見圖示。主機A 和B 無法互相通信。此問題的原因是什么?()
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()
何時必須使用clock rate 命令配置路由器串行接口?()
傳輸層如何讓主機能同時針對不同應用程序維護多個通信流?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲写嬖诙嗌賯€(gè)廣播域?()