A.has little or no internal friction
B.has a lower effective compression ratio
C.operates with scavenge air under a positive pressure
D.operates without energy absorbing intake and exhaust strokes
您可能感興趣的試卷
你可能感興趣的試題
A.Decreased connecting rod bearing clearance
B.Increased connecting rod bearing clearance
C.Decreased compression ratio
D.Increased compression ratio
A.less fuel will enter the cylinder
B.higher the cylinder combustion temperature
C.more complete the fuel combustion
D.more rapid the rise in combustion pressure
A.dust entering the high pressure stage
B.lube oil carbonization
C.discharge pulsations
D.inter-stage vapor lock
A.increased compression ratio
B.decreased compression ratio
C.increased bearing clearance
D.decreased bearing clearance
A.The cetane number is obtained by comparing the fuel with cetane a colorless liquid hydrocarbon
B.The higher the cetane number, the shorter the ignition lag
C.The highest cetane number of fuel is 100
D.All of the above
最新試題
() is not installed on the main switchboar.
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
The condensers located in various stages of a flash evaporator are cooled by()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
()are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?()
Under MARPOL Code the ship to which it applies has to carry ()
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()