A.Manually trip the over-speed device
B.Interrupt the fuel flow to the engine
C.Disengage the safety interlock
D.Slide the camshaft to the neutral position
您可能感興趣的試卷
你可能感興趣的試題
A.inlet nozzle ring
B.stationary diffuser passages
C.compressor outlet volute
D.rotating impeller vanes
A.excessive fuel nozzle holder cooling
B.sediment in the fuel supply
C.distortion of the fuel spray pattern
D.improper atomization of the fuel
A.lag behind the increased fuel supplied to the engine
B.enter the engine along with the increase in the fuel
C.enter the engine before the increased fuel supply
D.leave the turbocharger as a negative pulse
A.low compression
B.air-bound fuel system
C.improper spark
D.change in viscosity
A.insufficient fuel supply
B.faulty governor
C.high exhaust back pressure
D.all of the above may cause this problem
最新試題
If separating effect is not good, which measure should be taken ()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
If two A.C.generators are to be operated in parallel, the load is distributed evenly by()
The condensers located in various stages of a flash evaporator are cooled by()
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
Diesel engine air start system check valves are opened by ()
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?()
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the()
Cold weather starting of a diesel engine may be made easier by()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()