A.suction side of a bilge pump
B.exhaust manifold of an auxiliary diesel
C.discharge line from an air compressor
D.chemical feed tank of an evaporator
您可能感興趣的試卷
你可能感興趣的試題
A.They should always be started with the discharge valve closed
B.They should always be started with the discharge valve opened
C.A priming pump is always required to flood the impeller suction
D.They should always be started with the sealing line valves closed
A.compressor damage from improper lubrication
B.refrigerant absorption by the lubricant
C.increased viscosity in the lubricant
D.carbon deposit on the compressor suction valves
A.Spring-centered valve
B.Unloading valve
C.Three-position valve
D.Two-position valve
A.Expansion valve
B.Condenser
C.Evaporator
D.Compressor
A.The condenser and the expansion valve
B.The king valve and the solenoid valve
C.The compressor and the expansion valve
D.The condenser and the solenoid valve
最新試題
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by （）.
The rate of heat transfer between the hot and cold fluids passing through a shell-and-tube type heat exchanger will （）.
An excessive charge of refrigerant in an air-cooled refrigeration system can cause （）.
Which of the problems listed would came the discharge temperature of an R-12 refrigeration compressor to increase?（）
A grease gun is generally used to lubricate a （）.
If you are given the job of adding hydraulic fluid to a mooring winch, and are not certain as to the type of fluid to use, you should （）.
If the suction pressure at the refrigeration compressor is below normal, the cause can be（）.
On tank vessels equipped with power operated cargo tank valves, the type of power operator most commonly used is （）.
The rate of heat transfer from a hot region to a cold region is affected most by the （）.
A pressure drop through the refrigerant liquid line may cause （）.