A.loose expansion valve control bulb
B.low differential setting on the H-Pcutout
C.blown fuse in the motor circuit
D.faulty suction pressure regulator
您可能感興趣的試卷
你可能感興趣的試題
A.prevent an internal explosion in the pump when it is overheated
B.enable a visual inspection of the pump while it is running
C.insure a proper alignment of the pump coupling to the driver
D.accommodate for friction between the impeller and the easing
A.explosive range
B.flash point
C.ignition temperature
D.combustion temperature
A.the pressure regulating valve is not closing
B.an excessive lack of refrigerant in the system
C.badly leaking discharge valves
D.worn piston rings
A.Both are higher than normal burning temperatures
B.The flash point is always higher
C.The ignition temperature is always higher
D.They are not necessarily related
A.tend to twist about its long axis
B.expand in length and in diameter
C.contract in length and expand in diameter
D.flex at right angles to the applied pressure
最新試題
When the steering gear is in operation, you should （）.
An excessive charge of refrigerant in an air-cooled refrigeration system can cause （）.
The control mode in which the final control element is moved from one of two flexed positions to the other is known as （）.
The usual symptoms of cavitation in a centrifugal pump is （）.
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by （）.
Which of the following statements is correct concerning heat transfer?（）
The output volume of a positive fixed displacement pump can be changed only by （）.
A pressure drop through the refrigerant liquid line may cause （）.
The major source of chemical contaminants in hydraulic fluid is （）.
The temperature differential occurring between the inlet temperature of the fluid to be cooled and the outlet temperature of the cooling medium in a shell-and-tube heat exchanger is greatest in which of the flow designs listed?（）