A.drill holes through the heavy side of the impeller until it balances
B.weld counterweights to the light side of the impeller
C.remove metal from the heavy side by machining in a lathe
D.acid wash and serape the heavy side until it balances
您可能感興趣的試卷
你可能感興趣的試題
A.cause loss of hydraulic oil from the system
B.result in extreme damage to the pump
C.cause damage to the pump ff not continually drained from the pump casing
D.result in the system high side pressure to substantially drop off
A.saltwater heater shell
B.second-stage condenser
C.atmosphere
D.second-stage flash chamber
A.Ash content, carbon residue, and gravity
B.Viscosity, acidity, and demulsibility
C.Pour point, flash, point, and precipitation number
D.Auto-ignition point, viscosity index, and film strength
A.Protects against suction valve float
B.Provides a positive pressure on the air inlet valves
C.Prevents lubricating oil contamination of the compressed air supply
D.Protects against the damaging effects of airborne solid particles
A.warm-up allows the hydraulic system to become charged with oil
B.warm-up allows the relief valves to be properly tested
C.hydraulic strainers operate only during the warm-up period
D.hydraulic fluid must be at the proper viscosity
最新試題
Low compressor head pressure in a refrigeration system can be caused by().
Thermostatic expansion valves can be adjusted for ().
Which of the following problems could cause the high pressure cutout switch to shut down the compressor in a refrigeration system?()
A salinity indicator is used to determine the ().
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by ().
On tank vessels equipped with power operated cargo tank valves, the type of power operator most commonly used is ().
Which of the following statements is correct concerning heat transfer?()
When the steering gear is in operation, you should ().
One cause of high head pressure occurring in a refrigeration system can be ().
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will ().