A.passing it through the expansion valve
B.condensing refrigerant in the system condenser
C.passing the gaseous refrigerant through the heat interchanger on the suction side of the compressor
D.maintaining a high pressure on the systems receiver
您可能感興趣的試卷
你可能感興趣的試題
A.compressor
B.condenser
C.receiver
D.evaporator
A.secure and tag the electrical circuit
B.place a crow bar in the flywheel of the unit
C.inform all persons in the area not to start the unit
D.make a log book entry
A.stuffing box diameter
B.direction of rotation of the screws
C.pitch of the screws
D.type of driving gears
A.dew point temperature
B.condensation temperature
C.psychometric temperature
D.absolute humidity temperature
A.low viscosity index
B.high viscosity index
C.high neutralization number
D.low demulsibility quality
最新試題
A salinity indicator is used to determine the （）.
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump （）.
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will （）.
The rate of heat transfer from a hot region to a cold region is affected most by the （）.
The usual symptoms of cavitation in a centrifugal pump is （）.
An excessive charge of refrigerant in an air-cooled refrigeration system can cause （）.
The temperature differential occurring between the inlet temperature of the fluid to be cooled and the outlet temperature of the cooling medium in a shell-and-tube heat exchanger is greatest in which of the flow designs listed?（）
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be （）.
Thermostatic expansion valves can be adjusted for （）.
The control mode in which the final control element is moved from one of two flexed positions to the other is known as （）.