A.It is required that all ships are provided with two independent steering gear systems that is one main and one auxiliary
B.The auxiliary gear could be power operated in passenger ships
C.The auxiliary gear must be of adequate strength and sufficient to steer a ship at navigable speed
D.All moving parts of the steering gear must be guarded against any possible damage
您可能感興趣的試卷
你可能感興趣的試題
A.Only one pump should be used at any time
B.The ship speed should be reduced to 70% of the normal
C.Watch keeping of the steering gear should be increased
D.Limitations of the steering gear should be logged but the bridge need not be informed
A.Surrounding the fixed shaft is a hollow shaft
B.This hollow shaft carries radial bores
C.Each bore is fitted with a well-lapped plunger
D.There are always even numbers of bores
A.The cylindrical barrel is coupled to the motor
B.The cylindrical barrel has an odd number of bores
C.The bores end in sockets
D.The sockets fit in the swash plate
A.The rams work inside cylinders
B.The cylinders have glands sealing their open ends
C.The rams are connected to a cross-head
D.The cross-head is mounted on the rudder stock
A.keep the air from being carried into the engine
B.keep the moisture from being condensed
C.keep the danger from being carded into the engine
D.take away the condensate from the air
最新試題
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by ().
If the suction pressure at the refrigeration compressor is below normal, the cause can be().
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will ().
A salinity indicator is used to determine the ().
The rate of heat transfer from a hot region to a cold region is affected most by the ().
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by ().
Which of the problems listed would came the discharge temperature of an R-12 refrigeration compressor to increase?()
An increasing head pressure in a refrigeration system, without any corresponding change in the cooling water inlet temperature, would probably be caused by ().
A salinity indicator is used to determine the ().
Thermostatic expansion valves can be adjusted for ().