單項選擇題Load control on a diesel engine is accomplished by （）.

A.regulating the speed of the turbocharger
B.rotating the fuel injector pump plunger
C.regulating the speed of the fuel oil transfer pump
D.changing engine timing


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題When reassembling the bowl of a disk-type centrifuge, the bowl or locking ring is rotated （）.

A.clockwise, due to the bowl rotating clockwise
B.clockwise, due to the bowl rotating counterclockwise
C.counterclockwise, due to the bowl rotating clockwise
D.counterclockwise, due to the bowl rotating counterclockwise

2.單項選擇題In diesel engines designed with a crosshead, the motion of the piston rod can be described as （）.

A.reciprocating at the piston pin, rotary at the crank pin
B.reciprocating at the crank pin, rotary at the piston pin
C.straight reciprocation
D.straight rotation

3.單項選擇題Immediately after any diesel engine is started, the engineer should check the （）

A.crankcase pressure
B.lube oil pressure
C.saltwater pressure
D.exhaust temperature

4.單項選擇題The rate of heat transfer in a water-tube auxiliary boiler can be increased by （）.

A.operating the boiler at less than normal water level
B.installing fins on the firesides of water-tubes
C.increasing the amount of excess air to the burners
D.treating the boiler water with chemical oxygen scavengers

5.單項選擇題The term “proper metering”, as applied to a diesel fuel injection system, can be best defined as （）.

A.delivering the same quantity of fuel to each cylinder for each power stroke according to engine load
B.maintaining the metering adjustment for a reasonable period under all load conditions
C.timing fuel injection to obtain maximum power and good fuel economy
D.distributing the fuel to all parts of the combustion chamber for proper combustion