A.two fuel oil transfer pumps provided where one is to be independent of the main engine
B.two fuel oil transfer pumps, with a combined capacity exceeding the maximum consumption of the main engine
C.engine driven transfer pumps and only used in constant speed applications
D.the capacity of the engine driven pump exceed the consumption rate of the engine to which it is attached
您可能感興趣的試卷
你可能感興趣的試題
A.Camshaft beatings
B.Main bearings
C.Piston crowns
D.Cylinder walls
A.open the bypass line
B.cut in the lube oil cooler
C.pressurize the lube oil system
D.top off the expansion tank
A.crankpin
B.sliding wedge
C.wrist pin
D.torque bashing
A.increase
B.decrease
C.fluctuate
D.remain constant
A.visual inspection of the elements
B.the pressure drop across the filter
C.high lube oil sump temperature
D.decrease in oil viscosity from the filter
最新試題
Diesel engine control can be obtained by the bridge （）.
When would the available energy of the exhaust gases of a two-stroke/cycle diesel engine be insufficient to drive an exhaust gas turbocharger, resulting in the incorrect amount of air for combustion?（）
An automated diesel engine should normally shut down due to （）
If the water level dropped rapidly in the expansion tank of a closed diesel engine cooling water system, you should suspect a （）.
If a diesel engine is difficult to start and operates with the engine temperatures lower than normal, you should suspect that the （）.
In diesel engines, the four basic events (intake, compression, power and exhaust) are performed once in （）.
Maximum horsepower of a diesel engine is attained （）.
To determine if the lube oil filter elements need changing, （）.
Lube oil filters remove contaminants more efficiently if the oil being filtered is （）.
If the main engine of an unattended engine room shuts down automatically, it will be indicated by an alarm （）.