A.changing filter elements would not interrupt engine operation
B.filtering occurs twice in each pass of oil through the system
C.clogging will not occur
D.dropping pressure is half of that through a single filter unit
您可能感興趣的試卷
你可能感興趣的試題
A.decrease in maximum cylinder pressure
B.increase in ignition lag
C.decrease in fuel consumption per horsepower-hour
D.decrease in exhaust manifold pressure
A.low voltage trip to trip
B.reverse power trip to trip
C.damage to windings
D.excessive exhaust temperatures
A.ensure penetration and distribution of the fuel in the combustion chamber
B.ensure the needle valve is flushed clean during each injection
C.prevent combustion gas blowback into the open needle valve
D.prevent reflected pressure waves when the needle valve closes
A.slightly less than atmospheric pressure
B.approximately equal to exhaust manifold pressure at all times
C.that is widely fluctuating constantly
D.decreasing as engine load increases
A.volute pump
B.centrifugal pump
C.diaphragm pump
D.gear pump
最新試題
When would the available energy of the exhaust gases of a two-stroke/cycle diesel engine be insufficient to drive an exhaust gas turbocharger, resulting in the incorrect amount of air for combustion?()
The main purpose of the piston oil scraper rings is to ().
How many power strokes per crankshaft revolution are there in an eight cylinder, two stroke/cycle diesel engine?()
Which of the two events listed occurs simultaneously in a two-stroke/cycle diesel engine?()
If the water level dropped rapidly in the expansion tank of a closed diesel engine cooling water system, you should suspect a ().
If a diesel engine is difficult to start and operates with the engine temperatures lower than normal, you should suspect that the ().
Combustion knock occurring in a diesel engine can be caused by ().
Routine monitoring of a diesel engine should include ().
A thrust bearing is used with a propulsion diesel engine to ().
The highest pressure in a diesel engine cylinder normally occurs ().